Influence of Chord-to-Radius Ratio and Number of Blades on Cyclorotor Hover Aerodynamic and Aeroacoustic Performance

Abstract:
This study investigates the effects of chord-to-radius ratio (c/R) and blade count on the aerodynamic and aeroacoustic performance of cyclorotors through experimental testing and a low-fidelity streamtube model. Cyclorotors with c/R ratios between 0.3 to 0.75 and blade counts ranging from 5 to 9 were tested across pitch amplitudes up to 51°. For a 5-bladed configuration, the pitch amplitude that maximizes the force-to-power coefficient (CF/CP) increases with c/R from approximately 32° at low c/R to around 51° at high c/R. However, the peak attainable CF/CP decreases with increasing c/R, indicating a trade-off between optimal pitch amplitude and aerodynamic efficiency. Increasing blade count enhances the generated force but reduces efficiency in all cases except for the lowest c/R configuration (0.3). Aeroacoustic analysis shows that tonal noise is primarily driven by pitch amplitude and intensifies with increasing c/R, while additional blades effectively mitigate it. In contrast, broadband noise is less sensitive to variations in pitch amplitude, c/R, and blade count. The streamtube model captures key aerodynamic trends, particularly at moderate pitch amplitudes. Scaling studies identify optimal configurations for a given disk loading, balancing power consumption and noise levels and highlighting key trade-offs critical to urban air mobility applications.

Did you attend Forum 81? Click the preview below to access the full paper.

The full paper is also available for purchase at the Vertical Flight Society Online Library and Store.